Stabo/Tactical Full Body Harness

Specially designed for rapid rappel and extraction operations. The waist and sternum buckles have secondary velcro safety closure over buckles. Mil spec load bearing vest shoulder straps are sewn into the harness allowing the harness to be worn under any military load bearing vest by replacing the existing harness straps
with the Stabo straps and connecting the Alice clips of the vest the the waist of the harness. Leg pouches on the harness allow for leg loops to be stowed away when not in use. Currently being used by many DEA, FBI, BLM, Army Rangers and Special Forces personnel. Redesigned in 2004 to meet FAA TSO approval for use as a short
haul harness. Contrasting brown thread for visual inspection.

Weight 4 lb. 11 oz.
• One size, fully adjustable and in small
• Large D ring for multiple connections
• Shoulder D rings included
• Certified to NFPA 1983/2001 ed. standards
• Certified to ANSI/OSHA and CAN/CSA full body harness standards

Lightweight Assault with Tactical Full Body Chest

Full body harness designed for short haul, rappel and extraction (SPIE) operations. Lightweight Assault is combined with a easily adjustable single connection point chest harness. Easily
donned over tactical body armor. Web gear can be worn over chest harness. Particularly useful in military applications where a user needs to be extracted in a upright position if injured. Currently
used by military special operations units. Quick adjust hardware, low profile and lightweight. Weight 3 lb. 6 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• Also available as Padded Lightweight
Assault Full Body (item 352A) S-XL $229
•

Lightweight Assault Harness

Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. Similar to the standard Assault Harness with quick adjust waist buckle system for easier entry. D ring used for main attachment point. Weight 1 lb. 8 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• Quick leg adjustment with camlock buckles
• All hardware plated or epoxy coated in color
• One gear rack
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green

Padded Lightweight Assault Harness

Padded version of our popular Lightweight
Assault Harness. Waist and leg pads are constructed
of 3/8 inch laminated foam and cordura
fabric for comfort and durability. 5 inch wide
waist pad is available with rear structural D ring
for positioning applications. Waist pad with rear
D ring can be reversed for use in tactical
“Australian Rappel” applications. Leg pads are 4
inches wide and contoured to provide superior
comfort and function. Weight 2 lb. 3 oz.
• Sizes: S, M, L, XL
• Quick leg adjustment with camlock buckles
• All hardware plated or epoxy coated black
• One gear rack
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green

Assault Harness

Well suited for all rescue, military, SWAT and tactical applications where a Class II harness is utilized. 2 inch waist belt webbing for increased comfort during long rappels. Waist closure uses double-pass buckle system for added security. Forged D ring used for main attachment point. Optional, removable 5 inch waist pad with or without D ring for rear attachment is available (items 400 or 405) or purchased as 316A or 316B.
• One size, fully adjustable
• Quick leg adjustment with camlock buckles
• All buckles epoxy coated black
• One gear rack
• Meets ANSI/OSHA Class II harness standards

Assault Full Body Chest Harness

Offers upper chest D ring connection to the Assault or Lightweight Assault Harness converting them to a full body Class III harness. Chest portion is easily donned over tactical body armor using camlock buckle. Chest D ring can be used for attachment of belay line while allowing the user to rappel
or be lowered from the seat portion of the harness. Chest D ring is also useful as an extraction connection point.
• One size, fully adjustable

• Available in colors: Black, Terra, Foliage Green

Padded Assault

• Sizes S-XL

Padded Assault with Rear D Ring

• Sizes S-XL

Extraction Harness

Used by many agency personnel for short haul, rappel and extraction (SPIE) operations. All webbing and hardware colored black. Two piece quick connect buckles on the legs, waist and sternum. Redesigned in 2004 to meet FAA TSO approval for use as a short haul harness. Weight 4lb. 7oz.
• One size, fully adjustable
• Certified to NFPA 1983/2001 ed. standards
• Meets ANSI/OSHA Class III and Class II harness standards

Uniform Rappel Belt

Lightweight uniform belt that can be used for emergency rappels. Camlock waist buckle for quick adjustment and no slippage.
Front V ring used for attachment point. Makes a great instructor safety belt. Strength 4000 lbf.
• One size, fully adjustable and XL
• Available in colors: Black, OD Green, Terra, Foliage Green

QR Personal Retention Lanyard

Personal Retention Lanyard is designed using the first all black quick release shackle made of stainless steel.
Stainless steel quick release shackle is manufactured with a non reflective black oxide plating process.
Built with Mil-Spec. 5625 Tubular webbing this lanyard tests over 3,400lbf (15kN). Made in USA.

• Colors: Black or Sand

Uniform/BDU Belt

Lightweight uniform/BDU belt sewn with camlock waist buckle for quick adjustment and no slippage. Strength 4000 lbf.

• One size, fully adjustable and XL
• Available in colors: Black, OD Green, Terra, Foliage Green

Tactical Rappel Harness with D Ring Attachment Point

Specially designed for tactical applications. Can be worn as a belt and turned into a rappel seat by removing the leg portions of the harness from waist pocket. Utilizes Interlocking mating adjustment buckle system that allows for fast application. Leg straps can be quickly packed away in waist pocket when harness is turned back into a belt. Optional 5 inch waist pad is designed to accept military Alice clips for addition of military style gear and ammunition pouches (items
400 or 405). Weight 1 lb. 12 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• All hardware plated or epoxy coated in color
• Meets ANSI/OSHA Class II harness standards

• Available in Black

Tactical Rappel Belt

Designed in conjunction with military Special Ops units this harness is worn as a duty belt on users BDU’s. Stiffener webbing is sewn inside the belt area of the harness to support wearing side arm. Leg portion can be quickly donned by opening the pouch
and securing the leg loop portions with quick connect aluminium COBRA buckles. Harness attachment point is well suited for all rappel and extraction situations. Weight 1 lb. 6 oz.
• Sizes M and L
• Utilizes slot webbing construction

• Available in colors: Black, Terra, Foliage Green

Tactical Rappel Harness with Soft Attachment Point

Specially designed for tactical applications where a metal attachment point is not necessary. The lightest, quickest harness out there. Quickly and easily donned and adjusted by use of the camlock buckle. Can be worn as a belt and turned into a rappel seat by removing the leg portions of the harness from waist pocket.
Leg straps can be quickly packed away in waist pocket when harness is turned back into a belt. Optional 5 inch waist pad is designed to accept military Alice clips for addition of military style gear and ammunition pouches (items 400 or 405). Weight 1 lb. 5 oz.
• One size, fully adjustable
• Available in terra, black and foliage gre e n
• All hardware plated or epoxy coated in color
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green

SWAT/Special Ops Harness

Designed in conjunction with LAPD SWAT, this new harness utilizes a fully padded structural duty belt which is designed to replace the
existing padded duty belt worn by SWAT Officers. Super stiff scuba webbing is sewn to the outside of the belt to facilitate hanging of leg holsters, ammo pouches and gas mask bags. Stiff scuba webbing belt attached to inside structural webbing by velcoe for easy adjustment and positioning of holsters and pouches. Waist belt adjuster buckle is located on the left side so that it will not interfere with positioning of the right side weapon (harness is available in a model for left handed users). Leg loop portion of harness can be quickly attached to the belt with a standard locking carabiner (not included). This converts the duty belt portion of the system into a fully
functional rappel harness. Weight 1 lb. 12 oz.
• Sizes M, L, XL
• Quick leg adjustment with camlock buckles
• Fully structural rear attachment loop
• All hardware plated or epoxy coated black

Tactical Shield Climbing Harness

Designed for tactical situations with long hang time. Fully padded and totally adjustable. Wide 5 inch belt is super comfortable. Tapered anatomical design for flexibility and comfort. Waist belt adjusts 4 to 6 inches to accommodate for cold weather clothing or to be worn over heavy gear or vests. Camlock buckle closure system adds security and eliminates the need to double pass buckles. Racking system uses large diameter sheathed tubing for easy clipping. Wide, padded leg loops are fully adjustable with quick adjust buckles to accommodate a variety of sizing requirements. A new standard in tactical harness comfort and versatility. Weight 2 lb. 5 oz.
• Sizes S, M, L, XL, XXL
• Quick leg adjustment with camlock buckles
• 3500 lbf. rated haul loop
• All hardware plated or epoxy coated black
• Six gear racks
• Four tool holders
• Meets ANSI/OSHA Class II harness standards

Rescue Harness

Well suited for rescue, military, SWAT and tactical rappel applications where a metal attachment point is not necessary. Originally designed for the US Navy Seals tactical teams, the anatomical configuration
of the harness has made it the choice for many tactical teams who need a non-restrictive harness system. Front attachment point is provided through slot webbing construction. Weight 1 lb. 3 oz.
• One size, fully adjustable
• Available in terra, black and foliage green
• Quick leg adjustment with camlock buckles
• All hardware plated or epoxy coated in color
• One gear rack
• Meets ANSI/OSHA Class II harness standards

• Available in colors: Black, Terra, Foliage Green

Mountain Warfare Harness

Designed in cooperation with the USMC Mountain Warfare Training Center for special stealth needs in extreme tactical situations involving climbing, rappelling, SWAT and rescue. Currently being used in the USMC MACK (Military Assault Climbing Kit). 3.5 inch, fully padded waist pad. Over width legs give ultimate comfort without bulky leg pads. Unique overlapping waist pad design with multiple leg suspension attachments allow for total adjustability. Multiple
gear racking loops are provided. Weight 1 lb. 12 oz.
• Sizes Regular, L and XL
• Quick leg adjustment with camlock buckles
• 3500 lbf. rated haul loop
• All hardware plated or epoxy coated black
• Five gear racks
• Meets ANSI/OSHA Class II harness standards

SAR Harness

Lightweight harness specially designed for search and rescue professionals. Unique waist pocket enables harness to be worn as a belt and quickly converted to a Class II seat harness. Utilizes a double pass waist buckle and forged two piece friction buckles on the legs. Main attachment point allows freedom of movement with reduced bulk.
Weight 1 lb. 12 oz.
• Sizes S, M, L, XL. XXL by special order
• Utilizes slot webbing construction
• Leg buckles epoxy coated black
• Will accept military Alice clips for gear and
pouches
• Meets ANSI/OSHA Class II harness standards

Rescue Chest Harness

Basic chest harness with V ring attachment points that can be connected together with carabiner or rope. Comes with special O ring strap that provides a rigging point and connects the V rings. Weight 12 oz.
• One size, fully adjustable